6014460 Omega加熱器6014460
6014460
加熱器 ? 實驗室設備 ? HDB
恒溫加熱干浴
HDB
Uniform Heating for Test Tubes, Cuvettes, and Other Sample Containers
Interchangeable Insert Blocks
Models for 1, 2 or 3 Insert Blocks
Solid State Temperature Control
產品描述
OMEGA® HDB series heated dry baths provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis and a variety of clinical and industrial applications.
Interchangeable aluminum insert blocks are sized to accept tubes or containers ranging from 6 mm to 26 mm diameter. A close fit of the tubes in the block ensures high heat transfer to the tube, and the heater design, thermistor temperature sensor and solid state circuitry give exceptionally good temperature stability and uniformity.
Temperature stability is ±0.1°C, and uniformity between blocks is ± 0.2°C (both at 40°C).
Temperatures are adjusted in the HDB-1, HDB-2, and HDB-3 using a dial calibrated in degrees centigrade. On the HDB-3D, the dial and digital display are used to set the temperature. The digital indicator also provides a continuous temperature display.
A block extraction tool, and threaded fitting machined into the block, allow easy block removal. The threaded hole is also used to insert glass thermometers for accurate temperature measurement of the block.
Aluminum Insert Blocks
Model No. Tube Size Number of Holes Size (mm)
6013501 Plain Block None 95 x 76 x 51
6013502 6 mm 30 95 x 76 x 51
6013503 10 mm 20 95 x 76 x 51
6013504 12 mm 20 95 x 76 x 51
6013505 13 mm 20 95 x 76 x 51
6013506 15 mm 12 95 x 76 x 51
6013507 16 mm 12 95 x 76 x 51
6013508 19 mm 8 95 x 76 x 51
6013509 25 mm 6 95 x 76 x 51
6013510 10 mm cuvettes 2 channels 95 x 76 x 51
6013512* Plain Block Thermometer Hole Only 95 x 225 x 51
6014460 Plain Block Thermometer Hole Only 95 x 76 x 51
6014462 24 mm 6 95 x 76 x 51
6014463 26 mm 6 95 x 76 x 51
6014464 1.5 ml Eppendorf 20 95 x 76 x 51
6014465 0.5 ml Eppendorf 30 95 x 76 x 51
6014466 Plastic Half Plain Blocks** 95 x 37 x 50
*For HDB-3, HDB-3D only
**If less than the maximum number of blocks are used, it is recommended that the plastic half blocks fill the space on either side of the aluminum block(s) in order to maintain temperature stability
注: Comes with block extraction tool, power cord and plug, and operator’s manual. Aluminum insert blocks are ordered separately (see table above).
240 volt models also available. To order add “-240V” suffix to model number.
產品編號 產品描述
Heated Dry Baths
HDB-2 Heated dry bath, 2 blocks, 25°C to 105°C, 450 W, 120V
HDB-3 Heated dry bath, 3 blocks, 25°C to 200°C 650 W, 120V
HDB-3D Heated dry bath, 3 blocks, 25°C to 200°C 650 W, 120V, temperature and setpoint display
Aluminum Insert Blocks
6013501 0-hole insert block
6013502 30-hole insert block
6013503 20-hole insert block
6013504 20-hole insert block
6013505 20-hole insert block
6013506 12-hole insert block
6013507 12-hole insert block
6013508 8-hole insert block
6013509 6-hole insert block
6013510 Insert block
6013512 Hole-only insert block
6014460 Hole-only insert block
6014462 6-hole insert block
6014463 6-hole insert block
6014464 20-hole insert block
6014465 30-hole insert block
6014466 Insert block
產品型號
HDB-2
HDB-3
HDB-3D
6013501
6013502
6013503
6013504
6013505
6013506
6013507
6013508
6013509
6013510
6013512
6014460
6014462
6014463
6014464
6014465
6014466
6014467
6014468
6014469
6014460 Omega加熱器6014460相關產品
