AHP-3742-NF美國OMEGA AHP-3742-NF國內出售
AHP-3742-NF
加熱器 ? 過程空氣和管道加熱器 ? 風管型加熱器 ? AHP Series
T Type air Process Heaters For In-Line Air and Gas Heating
AHP Series
3 /8 ", 1 /2 " or 3 /4 " Diameters
Exit Air or Gas Temperatures to 1000°F (540°C)
Inlet Air or Gas Temperatures to 250°F (121°C)
For Horizontal Mounting
With or Without NPT fittings**
產品描述
APPLICATIONS
The AHP series in-line air heaters are used to heat clean, dry air or gas for baking, drying, laminating, metal working, packaging, plastic welding, preheating, sealing, soldering, shrink fitting and synthetic fabric sewing. AHP series air process heaters provide hot air and gas up to 1000°F (540°C) with infinite control by varying the voltage and/or the air flow. Closed loop control can also be achieved with temperature controllers (section P) and "T" fittings to mount thermocouples.
MOST POPULAR MODELS HIGHLIGHTED!
Model
Number Volts Watts Heated Length
in (mm) Watts/
Inch? Maximum
CFM Diameter
in (mm) NPT
Fitting Weight
lb (g)
120 VAC Models
AHP-3741 120 200 3 1/2 (89) 57 8 3/8 (10) 1/4' 0.18 (82)
AHP-5051 120 400 4 1/2 (114) 88 10 1/2 (13) 3/8' 0.25 (113)
AHP-7561 120 750 5 1/2 (140) 136 20 3/4 (19) 3/4' 0.68 (308)
120/240 VAC Models*
AHP-3742 120
240 50
200 3 1/2 (89)
3 1/2 (89) 14
57 8
8 3/8 (10) 1/4' 0.18 (82)
AHP-5052 120
240 100
400 4 1/2 (114)
4 1/2 (114) 22
80 10
10 1/2 (13) 3/8' 0.25 (113)
AHP-7562 120
240 190
750 5 1/2 (140)
5 1/2 (140) 34
136 20
20 3/4 (19) 3/4' 0.68 (308)
*These air heaters can be operated on either 120 or 240 Volts. Specifications are shown for operation on
both 120 and 240 Volts.
?Indicates Watts per inch of heated length. Use the table above to determine minimum required flow rates.
The Watts per inch of heated length can be changed by reducing the operating voltage or by ordering a custom
made heater.
Dimensions in Inches (mm)
Series Diameter Heated
Length L A B
AHP-374 3/8 (9.5) 3 1/2 (88.9) 4 (101.6) 5/16 (7.9) 1 5/16 (33.3)
AHP-505 1/2 (12.7) 4 1/2 (114.3) 5 (127.0) 13/8 (34.9) 1 3/4 (19.)
AHP-756 3/4 (19.1) 5 1/2 (139.7) 6 (152.4) 27/16 (61.9) 1 5/8 (41.3)
Maximum Watts Per Linear Inch of Heated Length
Minimum CFM Required 3/8" Dia. 1/2" Dia. 3/4" Dia.
1 60 80 120
2 60 80 120
4 100 100 120
6 150 150 150
8 200 200 200
10 - 250 250
15 - - 375
20 - - 500
SPECIFICATIONS
Pressure Rating: 80 PSIG
Wattage Tolerance: +5, -10% or better at the voltage specified
Leads: 12 inch long fiberglass insulated leads
產品編號 產品描述
120 VAC Models
AHP-3741 120 Volt, 200 Watt, 3 1/2 ' Heated Length
AHP-5051 120 Volt, 400 Watt, 4 1/2 ' Heated Length
AHP-7561 120 Volt, 700 Watt, 5 1/2 ' Heated Length
120/240 VAC Models
AHP-3742 120 / 240 Volt, 50 / 200 Watt, 3 1/2 ' Heated Length
AHP-5052 120 / 240 Volt, 100 / 400 Watt, 4 1/2 ' Heated Length
AHP-7562 120 / 240 Volt, 190 / 750 Watt, 5 1/2 ' Heated Length
AHP-7562-NF 120/240 Volt, 190/750 Watt,, 5 1/2' Heated, without NPT fitting
Accessories - Thermocouple T-Fitting
AHP-NPT34 Thermocouple T-Fitting
==========
AHP-3741 AHP-3742
AHP-3742-24 AHP-3742-NF
AHP-5051 AHP-5051-NF
AHP-5052 AHP-5052-NF
AHP-7561 AHP-7562
AHP-7562-NF AHP-NPT34
AHPF-061 AHPF-062
AHPF-081 AHPF-082
AHPF-101 AHPF-102
AHPF-102/120V/250
AHPF-121 AHPF-122
AHPF-NPT12 AHPH-NPT12
AHP-3742-NF
AHP-3742-NF美國OMEGA AHP-3742-NF國內出售相關產品
