SGT-3JS/350-SY41貨源穩定SGT-3JS/350-SY41進口應變計
SGT-3JS/350-SY41
壓力、應力和重力 ? 應變計, 配件和測量儀器 ? 傳感器質量的應變計 ? SGT-3E, SGT-3F, SGT-3
全惠斯通電橋，反向彎曲梁或回折梁
RoHS
Precision Transducer Quality Gages
Available in 350 or 1000 ohms
Three Center Line Spacings to Choose From
產品描述
Design and build your own transducers. These full bridge strain gages might be used to design transducers for beams that have a contraflexure point. Contraflexure is defined as a point in a structure where bending occurs in opposite directions. This may also be described as a reversed bending beam, or a double bending beam. The 4 grids are linear, all in the same direction. Look up the modulus of elasticity and the yield strength of your material, and design the spring element so that you will be working in the linear portion of the stress-strain curve. For best results use stainless steel or aluminum and match the strain gage temperature characteristics. You may use these full bridge strain gages for bending strain applications where only one side of the beam is available for strain gage installation. These gages are easy to work with as the carrier piece has all 4 strain gages for fast and easy installation. Having one carrier with multiple strain gages offers several advantages. Alignment of the 4 strain gages with respect to each other is already done. Some of the strain gages share common ribbon leads or Solder Padss which saves wiring steps and valuable time. The corners of the Wheatstone bridge at the signal output have been left open so that sensor performance can be tested and improved. Zero temperature compensation resistors and zero balance compensation resistors can be easily added into the open corners of the Wheatstone bridge circuit. An extra bondable terminal pad can be placed at the open corner so that the appropriate resistors can be wired in. Or you can simply connect your 4 leads (+Excitation, -Excitation, +Signal, -Signal) and jumper the signal leads together as needed to complete the Wheatstone bridge. Power up your transducer, and calibrate it with a known applied load.
產品編號 產品描述
Sold in Packages of 5 Gages
Full Bridge Pattern for Double Bending Beam with Center Line Spacing 6.35 mm (0.25")
SGT-3E/350-FB11 Full Bridge, 350 ohms, Ribbon Leads, Compensated for Steel
SGT-3E/350-FB13 Full Bridge, 350 ohms, Ribbon Leads, Compensated for Aluminum
SGT-3E/350-FB41 Full Bridge, 350 ohms, Solder Pads, Compensated for Steel
SGT-3E/350-FB43 Full Bridge, 350 ohms, Solder Pads, Compensated for Aluminum
Full Bridge Pattern for Double Bending Beam with Center Line Spacing 8.38 mm (0.33")
SGT-3F/350-FB11 Full Bridge, 350 ohms, Ribbon Leads, Compensated for Steel
SGT-3F/350-FB13 Full Bridge, 350 ohms, Ribbon Leads, Compensated for Aluminum
SGT-3F/350-FB41 Full Bridge, 350 ohms, Solder Pads, Compensated for Steel
SGT-3F/350-FB43 Full Bridge, 350 ohms, Solder Pads, Compensated for Aluminum
Full Bridge Pattern for Double Bending Beam with Center Line Spacing 15 mm (0.59")
SGT-3/1000-FB11 Full Bridge, 1000 ohms, Ribbon Leads,Compensated for Steel
SGT-3/1000-FB13 Full Bridge, 1000 ohms, Ribbon Leads, Compensated for Aluminum
SGT-3/1000-FB41 Full Bridge, 1000 ohms, Solder Pads, Compensated for Steel
SGT-3/1000-FB43 Full Bridge, 1000 ohms, Solder Pads, Compensated for Aluminum
產品編號
Sold in Packages of 5 Gages
Full Bridge Pattern for Double Bending Beam with Center Line Spacing 6.35 mm (0.25")
SGT-3E/350-FB11
SGT-3E/350-FB13
SGT-3E/350-FB41
SGT-3E/350-FB43
Full Bridge Pattern for Double Bending Beam with Center Line Spacing 8.38 mm (0.33")
SGT-3F/350-FB11
SGT-3F/350-FB13
SGT-3F/350-FB41
SGT-3F/350-FB43
Full Bridge Pattern for Double Bending Beam with Center Line Spacing 15 mm (0.59")
SGT-3/1000-FB11
SGT-3/1000-FB13
SGT-3/1000-FB41
SGT-3/1000-FB43
產品型號
SGT-3/1000-FB11
SGT-3/1000-FB13
SGT-3/1000-FB41
SGT-3/1000-FB43
SGT-3/1000-XY11
SGT-3/1000-XY13
SGT-3/1000-XY41
SGT-3/1000-XY43
SGT-3/350-DY11
SGT-3/350-DY13
SGT-3/350-DY41
SGT-3/350-DY43
SGT-3/350-XY11
SGT-3/350-XY13
SGT-3/350-XY41
SGT-3/350-XY43
SGT-3/700-FB11
SGT-3/700-FB13
SGT-3/700-FB41
SGT-3/700-FB43
SGT-3BH/350-XY11
SGT-3BH/350-XY13
SGT-3BH/350-XY41
SGT-3BH/350-XY43
SGT-3D/1000-SY11
SGT-3D/1000-SY13
SGT-3D/1000-SY41
SGT-3D/1000-SY43
SGT-3D/350-SY11
SGT-3D/350-SY13
SGT-3D/350-SY41
SGT-3D/350-SY43
SGT-3DH/350-SY41
SGT-3DH/350-SY43
SGT-3E/350-FB11
SGT-3E/350-FB13
SGT-3E/350-FB41
SGT-3E/350-FB43
SGT-3E/350-TY11
SGT-3E/350-TY13
SGT-3E/350-TY13-6IFIL-EP
SGT-3E/350-TY41
SGT-3E/350-TY43
SGT-3ES/350-SY11
SGT-3ES/350-SY13
SGT-3ES/350-SY41
SGT-3ES/350-SY43
SGT-3F/350-FB11
SGT-3F/350-FB13
SGT-3F/350-FB41
SGT-3F/350-FB43
SGT-3F/350-TY11
SGT-3F/350-TY13
SGT-3F/350-TY41
SGT-3F/350-TY43
SGT-3FS/350-SY11
SGT-3FS/350-SY13
SGT-3FS/350-SY41
SGT-3FS/350-SY43
SGT-3G/350-FB11
SGT-3G/350-FB13
SGT-3G/350-FB41
SGT-3G/350-FB43
SGT-3GS/350-SY11
SGT-3GS/350-SY13
SGT-3GS/350-SY41
SGT-3GS/350-SY43
SGT-3H/1000-XY11
SGT-3H/1000-XY13
SGT-3H/1000-XY41
SGT-3H/1000-XY43
SGT-3H/350-XY11
SGT-3H/350-XY13
SGT-3H/350-XY41
SGT-3H/350-XY43
SGT-3H/350K-SY11
SGT-3H/350K-SY13
SGT-3H/350K-SY41
SGT-3H/350K-SY43
SGT-3HB/350K-SY11
SGT-3HB/350K-SY13
SGT-3HB/350K-SY41
SGT-3HB/350K-SY43
SGT-3J/350-TY11
SGT-3J/350-TY13
SGT-3J/350-TY41
SGT-3J/350-TY43
SGT-3JS/350-SY11
SGT-3JS/350-SY13
SGT-3JS/350-SY41
SGT-3JS/350-SY43
SGT-3L/350-XY11
SGT-3L/350-XY13
SGT-3L/350-XY41
SGT-3L/350-XY43
SGT-3M/350-SY13
SGT-3M/350-SY41
SGT-3N/350-DY11
SGT-3N/350-DY13
SGT-3N/350-DY41
SGT-3JS/350-SY41
SGT-3JS/350-SY41貨源穩定SGT-3JS/350-SY41進口應變計相關產品
