CN6201-DC Omega控制器CN6201-DC
CN6201-DC
1/16 DIN斜坡/恒值溫度/過程控制器
CN6201 Series
3年保修 新產品!
1/16 DIN斜坡/恒值溫度/過程控制器
CN6201 Series:1/16 DIN斜坡/恒值溫度/過程控制器
雙重顯示
PID控制
通用輸入
單16段斜坡/浸泡程序
RS485通訊（可選）
警報（可選）
重傳輸出（可選）
該cn6201系列溫度控制器有1個程序組成的圖案的16段，可以很容易地設置和操作。2輸出事件提供標準。外部接點輸入，RS485通信和重傳輸出是可選的。通用輸入支持熱電偶，RTD和電壓輸入類型和3種類型的輸出。前面板具有防濺和防塵設計（IP65）。
Input Type Range (°C) Range (°F)
Thermocouple K -270 to 1370 -300 to 2500
0 to 600 32 to 999.9
0 to 400 32 to 750
-199.9 to 200 -300 to 400
J -199.9 to 999.9 -300 to 2100
T -199.9 to 400 -300 to 750
E -199.9 to 999.9 -300 to 1800
R 0 to 1700 32 to 3100
S 0 to 1700 32 to 3100
B 0 to 1800 32 to 3200
N -200 to 1300 -300 to 2400
L -199.9 to 900 -300 to 1600
U -199.9 to 400 -300 to 750
Platinel 2 0 to 1390 32 to 2500
RTD Pt100 -199.9 to 850 -199.9 to 999.9
0 to 400 32 to 750
-199.9 to 200 -300 to 400
-19.9 to 99.9 -199.9 to 999.9
JPt100 -199.9 to 500 –SPECIFICATIONS
PV/SP Data Display: 4-digit, PV/SP separately
PV Inputs:
Method: Universal input
Thermocouple: Types K, J, T, E, R, S, B, N, L, U, Platinel 2
RTD: Pt100, JPt100
Voltage: 0 to 100mV, 0 to 5V, 1 to 5V, 0 to 10V
Input Accuracy:
Thermocouple: ±2°C ±1digit
RTD: ±1°C ±1digit
Voltage (mV, V): ±0.3% ±1digit
Sampling Period: 500 ms
Number of Program Patterns: 1
Number of Program Segments: 16
Program Time Span: 0 s to 1,599 hr
Accuracy of Program Time Span: ±2% of program time span
Control Ouput:
Relay Output: Time-proportional PID or on/off
Voltage Pulse Output: Timeproportional PID 4 to 20 mAdc Output: Continuous PID
Event Output:
Number of Points: 2 relay
Type: PV and time
Power Supply: 100 to 240 Vac or 24 Vac/dc (optional)
Safety and EMC Standard: CSA, CE and UL
Construction (Front Protection): IP65
Dimensions: 48 W x 48 H x 100 mm D (1.89 x 1.89 x 3.94")
Weight: Approx. 200 g (0.44 lb)
External Contact Input (Optional): Run/reset, hold/cancel hold
PV Retransmission Output: 4 to 20 mAdc
RS485 Communication (Optional): MODBUS/Ladder/PC-link protocol
24 V Power Supply (Optional): 24 Vdc/24 Vac
Measured Value (PV) Input
Input: 1 point
Type: Universal
Accuracy (at 23 ±2°C Ambient Temperature):
Thermocouple: ±2°C ±1digit
Input -200 to -100°C: ±4°C
Input -100 to -0°C: ±3°C
Types R and S: ±5°C (±9°C for 0 to 500°C)
Type B: ±9°C (accuracy is not guaranteed for 0 to 400°C)
RTD: ±1°C ±1digit
Voltage(mV, V): ±0.3% ±1digit
Sampling Period for Measured Value Input: 500 ms
Burn-Out Detection: Functions for thermocouple or RTD input (burn-out upscale only; cannot be switched off)
Input Resistance: 1 MΩ or greater for thermocouple or mVdc inputs; approx. 1 MΩ for Vdc input
Maximum Allowable Signal Source Resistance: 250 Ω for thermocouple or mVdc inputs; 2 kΩ for Vdc input
Maximum Allowable Wiring Resistance for RTD Input: 10Ω/wire (the resistance values of 3 wires must be the same.)
Allowable Input Voltage: ±10 Vdc for thermocouple or mVdc inputs; ±20 Vdc for Vdc input
Noise Rejection Ratio:
Normal Mode Noise: Minimum 40 dB (50/60 Hz)
Common Mode Noise: Minimum 120dB (90 dB for Vdc input)
Error of Reference Junction Compensation: ±1.5°C (at 15 to 35°C); ±2.0°C (at 0 to 50°C) The reference junction compensation cannot be switched off
Applicable Standards: Thermocouple and RTD, JIS/IEC/DIN, (ITS90)
Retransmission Output (Optional)
Output Signal: Measured value in 4 to 20mAdc can be scaled.
Maximum Load Resistance: 600 Ω
Output Accuracy: ±0.3% of span (at 23 ±2°C ambient temperature)
Power Supply and Isolation
Power Supply:
Voltage:
Frequency: 50 or 60 Hz
Maximum Power Consumption:
Memory: Non-volatile
Withstanding Voltage: Between Primary and Secondary
Terminals: 1500 Vac for 1 minute (see Notes 1, 2 and 3)
Insulation Resistance: Between Primary and Secondary
Terminals: 20 MΩ or more at 500 Vdc (see Notes 1, 2 and 3)
Note 1: The primary terminals are the power supply terminals and event output terminals. The secondary terminals are the analog input and output terminals, the voltage pulse output terminals, and the contact input terminals.
Note 2: The withstanding voltage is specified as 2300 Vac per minute to provide a margin of safety.
Note 3: AC/DC 24 V terminals are secondary terminals.
產品型號 產品描述
CN6201-R-PV Single output, relay, 4 to 20 mA output
CN6201-DC-PV Single output, DC pulse, 4 to 20mA output
CN6201-R Single output, relay
CN6201-DC Single output, DC Pulse
CN6201-F Single output, 4 to 20 mA
CN6201-DC
CN6201-DC Omega控制器CN6201-DC相關產品
